How To Use: Hydra Absolute
Dilute Absolute using up to 3 parts of water.
Use as hot or cold solution.
Absolute may be used:
- In Soak tanks
- By brush
- In mop solutions
- Swab method
Apply neat for cleaning heavy compacted grease.
How to use Hydra Absolute in soak tanks:
Make a diluted solution (as directed) of Hydra Absolute in plastic tank. Soak the articles to be cleaned in the solution and wait until all dirt and corrosion are dissolved. After desired results rinse the articles using clean water. Pressure water cleaning yields better results by loosening grime in crannies or bends. Allow the articles to completely dry. Apply coating of Hydra Absolute metal surface protector.
How to use Hydra Absolute as mop solution:
Use diluted solution (prepared as directed) of Hydra Absolute and apply using brush or mop. Allow some contact time, until you can visibly check released corrosion, dirt, and rust. Rinse/ wipe using clean water. Allow the surface to dry up before apply a protective coat of Absolute.
How to clean hardened dirt/grease layers using Hydra Absolute:
Use neat Hydra Absolute for cleaning compacted grease. Apply on the surface/floor to be cleaned. Let Absolute act upon dirt layers for about 30-40 minutes. Shake up the loosened grime using a stiff broom until original surface/floor is visible. Rinse/wipe with clean water. Apply protective coating if required.