Note: Please check the dimensions are suitable for your requirement before ordering.
Features & Advantages
- Includes two chambers for effective grease removal.
- Traps FOG's, help you maintain free running wastewater disposal system
- Helps you adhere to legislative regulations regarding foul water drainage
- Can be installed below or above the ground as per your convenience
- Made from robust HDPE material which resists corrosion
- Suits the requirement of medium activity commercial kitchen.
- Sufficient for 150 covers a day
How To Use
- Ready to install units supplied.
- Installation to be done only by a qualified plumber.
- You may require pipe size reducers for inlet and 110 coupler for outlet.
- To achieve maximum benefit out of your grease trap unit use Hydra Grease-Eater Liquid, which digests FOG's and prevent solid build ups to accumulate.
- Regularly add Hydra Grease-Eater Liquid to the grease trap to prevent bad odours and choking. Add the liquid either manually or via Grease-Eater Auto- Dosing Pump
Please use following reference guide to know about the daily dosage of grease eater liquid.
| Grease-Eater Dosing Chart |
| Grease Trap Fitted | No Grease Trap Fitted |
| Size Grease Trap | Daily Dose Amount | Drainage Run | Daily Dose Amount |
| Up To 50 litres | 150 ml a day | Up To 50 metres | 150 ml a day |
| 50-200 litres | 170 ml a day | 15 - 50 metres | 170 ml a day |
| 200-300 litres | 200 ml a day | 50 - 75 metres | 200 ml a day |
| Over 300 litres | 300 ml a day | Over 75 metres | 300 ml a day |
| Over 1,000 litres | 400 ml a day | | |
| Over 2,000 litres | 500 ml a day | | |
| The best time to apply Grease Eater Enzyme Liquid is an hour after the kitchen close to avoid any boiling water, detergents or fats. |
Add Grease Eater Liquid manually or automatically using Hydra Grease-Eater Dosing Pump.
According to the Building Regulations 2000 (H1 Foul water drainage - 2.21), amended 2002 all kitchen drainage system in a commercial hot food joint should include an effective grease removal process.
Description
Grease interceptors are an essential part of kitchen drainage system to prevent grease, liquefied fat or oil from entering the main sewage or septic tank treatment system. FOG's allowed to escape into the wastewater disposal system can disturb the efficiency of treatment facility and ultimately harm the environment. For all kitchens involved in catering, small processing establishment or serving at least 30 meals in a day grease trap installation is important. Grease trap are equally useful in regular commercial kitchens.
Technical Information
Model: Hydra GT150L (150 Ltrs) Grease Trap | Hydra GT300L (300Ltrs) Grease Trap | Hydra GT450L (450 Ltrs) Grease Trap
Location: Above or below Ground Installation
Approx No. of covers: 150 | 300 | 450
Flow L/sec: 0.75 | 2.0 | 2.5
Weight: 24 kg | 20Kg | 30Kg
Pipe Size: 110mm
| Hydra Grease Trap Range - Sizes** |
| Model | Location* | Approx Covers** | Flow L/Sec** | Dimensions**
L x W x H | Pipe
Size |
| Hydra ST1 - 18 Litre Grease Trap (4 gallon) | Above Ground | 12 | 0.15 | 475x250x320mm
18.7x9.8x12.6inch
weight 3 kilo | 50mm |
| Hydra ST2 B - 55 Litre Grease Trap (12 gallon) | Above Ground | 35 | 0.25 | 500x294x510mm
19.7x11.6x20.1inch
weight 5 kilo | 50mm |
| Hydra ST2 A - 55 Litre Grease Trap (12 gallon) | Above Ground | 35 | 0.25 | 605x400x380mm
23.8x15.7x14.9inch
weight 5 kilo | 50mm |
| Hydra ST3 - 70 Litre Grease Trap (15 gallon) | Above Ground | 70 | 0.35 | 470x470x475mm
18.5x18.5x18.7inch
weight 7 kilo | 50mm |
| Hydra GT150L (150 Ltrs) Grease Trap (35 gallon) | Above or Below Ground | 150 | 0.75 | 750x570x530mm
29.5x22.4x20.9inch
weight 24 kilo | 110mm |
| Hydra GT300L (300 Ltrs) Grease Trap (70 gallon) | Above or Below Ground | 300 | 2 | 1550x570x530mm
61.0x22.4x20.9inch
weight 20 kilo | 110mm |
| Hydra GT450L (450 Ltrs) Grease Trap (100 gallon) | Above or Below Ground | 450 | 2.5 | 1670x690x530mm
65.7x27.2x20.9inch
weight 30 kilo | 110mm |
| ** Dimensions do not include external pipe work.All the pipe work are manufactured from black polyethylene have lids, internal baffles and connectors for standard pipe-work either 50mm or 100mm depending on model. |
