Note: Please check the dimensions are suitable for your requirement before ordering.
Features & Advantages
Note : Hydra ST2 A - 55 Litre Grease Trap is for Above Ground Installation & Suitable for Low Commercial Applications.
Dimensions : 605mm x 400mm x 380mm
Note :Hydra ST2 B - 55 Litre Grease Trap is for Above Ground Installation & Suitable for Low Commercial Applications.
Dimensions : 500mm x 294mm x 510mm
Note : Hydra ST3 - 70 Litre Grease Trap is for Above Ground Installation only.
Dimensions : 470mm x 470mm x 475mm
- Available in 55 litres - 70 litres capacity
- Sufficient for kitchens serving 12 meals-70 meals per day
- Suits domestic kitchens
- Easily installable above the ground
- ST2A, ST2B , ST3 - Two Chambers
- Grease-Eater Liquid -1 litre pack free with the product
- Traps grease, fats and oil allowing only water to pass through the system. Trapped FOG's are broken down into water and CO2 with the help of Hydra Grease Eater Liquid
How To Use
Install Hydra Grease Trap as per the instructions accompanying the product. Use reducers if needed to connect the unit to your pipe work. Installation should be done with making provisions included to access the top for occasional cleaning.
Use Hydra Grease-Eater Liquid to keep the trap and drains free flowing and odour free.
| Grease-Eater Dosing Chart |
| Grease Trap Fitted | No Grease Trap Fitted |
| Size Grease Trap | Daily Dose Amount | Drainage Run | Daily Dose Amount |
| Up To 50 litres | 150 ml a day | Up To 50 metres | 150 ml a day |
| 50-200 litres | 170 ml a day | 15 - 50 metres | 170 ml a day |
| 200-300 litres | 200 ml a day | 50 - 75 metres | 200 ml a day |
| Over 300 litres | 300 ml a day | Over 75 metres | 300 ml a day |
| Over 1,000 litres | 400 ml a day | | |
| Over 2,000 litres | 500 ml a day | | |
| The best time to apply Grease Eater Enzyme Liquid is an hour after the kitchen close to avoid any boiling water, detergents or fats. |
Hydra Grease Eater Liquid may be added automatically into the fat trap using Hydra Grease-Eater Dosing Pump to ensure regular dose and low maintenance.
Description
Grease traps are usually tank shaped units installed between the kitchen sink and the waste water outlet pipe. These important component of any kitchen help in averting the upsetting consequences of blocked drains, foul odours and malfunctioning septic systems. Grease traps used in domestic kitchen help homeowners maintain trouble free drains and septic systems. In absence of grease separators FOG's solidify in pipes and septic tank producing harmful consequences including frequent emptying of the tank, foul smell and overflowing septic tanks or soak-away.
Technical Information:
Model: ST2 A Grease Trap | ST2 B Grease Trap | ST3 Grease Trap
Location: Above Ground Installation
Approx No. of covers: 35 | 35 | 70
Flow L/sec: 0.25 | 0.25 | 0.35
Weight: 5 kg | 5 kg | 7 kg
Pipe Size: 50mm (reducers available)
Dimensions : 605x400x380mm | 500x294x510mm | 470x470x475mm
| Hydra Grease Trap Range - Sizes** |
| Model | Location* | Approx Covers** | Flow L/Sec** | Dimensions**
L x W x H | Pipe
Size |
| Hydra ST1 - 18 Litre Grease Trap (4 gallon) | Above Ground | 12 | 0.15 | 475x250x320mm
18.7x9.8x12.6inch
weight 3 kilo | 50mm |
| Hydra ST2 B - 55 Litre Grease Trap (12 gallon) | Above Ground | 35 | 0.25 | 500x294x510mm
19.7x11.6x20.1inch
weight 5 kilo | 50mm |
| Hydra ST2 A - 55 Litre Grease Trap (12 gallon) | Above Ground | 35 | 0.25 | 605x400x380mm
23.8x15.7x14.9inch
weight 5 kilo | 50mm |
| Hydra ST3 - 70 Litre Grease Trap (15 gallon) | Above Ground | 70 | 0.35 | 470x470x475mm
18.5x18.5x18.7inch
weight 7 kilo | 50mm |
| Hydra GT150L (150 Ltrs) Grease Trap (35 gallon) | Above or Below Ground | 150 | 0.75 | 750x570x530mm
29.5x22.4x20.9inch
weight 24 kilo | 110mm |
| Hydra GT300L (300 Ltrs) Grease Trap (70 gallon) | Above or Below Ground | 300 | 2 | 1550x570x530mm
61.0x22.4x20.9inch
weight 20 kilo | 110mm |
| Hydra GT450L (450 Ltrs) Grease Trap (100 gallon) | Above or Below Ground | 450 | 2.5 | 1670x690x530mm
65.7x27.2x20.9inch
weight 30 kilo | 110mm |
| ** Dimensions do not include external pipe work.All the pipe work are manufactured from black polyethylene have lids, internal baffles and connectors for standard pipe-work either 50mm or 100mm depending on model. |
