Hydra Heating Oil Additive

Datasheet (Hydra Heating Oil Additive) - Click here

Vapourising burners as found in Aga, Rayburn and Range Master cookers are very sensitive to carbon and soot build-up, it is not unknown for them to soot up every 4-6 weeks. Hydra Heating Oil Additive prevents these deposits from building up, keeping the burners free of soot between services.

USAGE

For Heavily Contaminated Fuel System
Dilution rate: 1:2500 i.e. 100ml treats 250 litres of fuel.

Refuelling Dose to Protect Clean Fuel System
Dilution rate: 1:5000 i.e. 100 ml of treats 500 litres of heating oil. Treat oil tanks every time they are topped up.

OPTIMISED SPRAY PATTERN

Most heating boilers are of a pressure jet design which use precise fuel metering through narrow shaped spray channels. Injector deposits mean reduced fuel flow. Whereas 100% clean injectors give optimal fuel spray pattern. Each finely dispersed particle of fuel is surrounded by many molecules of air (20% oxygen) ensuring a more complete burn. Which in turn gives you better fuel economy, reduced emissions and improved boiler durability.

POWERFUL DETERGENTS

Hydra Heating Oil Additive contains heavy duty detergents prevents the formation of and removes existing deposits from burners and injectors and heat exchangers. In the oil tank safely dissolves years of corrosive sludge back into the fuel where it's burned away. While creating a protective barrier to stop the sludge gunk from coming back!

PREMIUM UPGRADE

Using Hydra Heating Oil Additive upgrades standard heating oil to a premium standard for heating oil. The boiler fires easier with reduced soot and fuel consumption. Better combustion means less deposits on burners and heat exchanger.

INTERNATIONAL STANDARDS

All our products are manufactured to the highest international specifications at our UK plant.

Ques : Is this use for putting straight into home heating oil tank which feeds the central heating boiler only ?

Ans. Yes, Add Hydra heating oil additive straight in to the oil tank in correct dilution then top up with new fuel. Please make sure Fuel tanks being treated should be at least 10% full.

Ques : I've just replaced my oil tank but although a lot of sludge was removed some contaminated oil was transferred back to the new tank. If I'm adding the Hydra Heating Oil Additive to the fuel do I need to add a biocide additive as well our will the Heating Oil Additive do both jobs.

Ans. To play safe we recommend you to add the biocide Hydra FuelPlus as well.

Ques : Can you please advise if the Hydra Heating Oil additive is suitable for use in a solid fuel Rayburn stove that was converted to oil using a Don burner? The burner is not a vaporising burner, but a gravity feed oil drip. I do know that some types of additive are not suitable for this type of burner and just wondered if you had encountered this problem before? Thanks

Ans. This will still work with your type of burner.

Ques : Hi, is the amount of heating oil additive critical ie if I buy some? Is it possible to add too much?

Ans. No. If you overdose it is OK.

Ques : Hi. Can I just check this is for kerosene? Also, why two lids? Thanks

Ans. Yes. One is measuring cylinder & other one is direct pouring.

Ques : Old Rayburn with wick burners does your additive cause any problems with these burners.

Ans. No, it will work OK with these.